Oil, Gas, Petrochemical

search product by name
search results // 28 items found
description:
Hi-Pon 20-04 STE 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric environments.
description:
Hi-Pon 20-04 STE IM 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
description:
Hi-Pon 20-04 STE MIO 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating pigmented with micaceous iron oxide. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
description:
Hi-Pon 20-09 Epoxy Shop Primer FD is a two-pack, fast drying amide- cured epoxy prefabrication primer.
description:
Hi-Pon 20-09 Epoxy Shop Primer FD Autoblast is a two-pack, fast drying amide-cured epoxy prefabrication primer.
description:
Hi-Pon 200 CUI Epoxy Phenolic is a two-pack self-priming epoxy phenolic coating with excellent corrosion resistance when used to protect steelwork under thermal insulation in areas subjected to wet and dry cycling. It also offers good chemical resistance.
description:
Hi-Pon 30-02 Epoxy MIO 80 is a two-pack, high solids, fast dry epoxy coating pigmented with micaceous iron oxide. It provides a high build impervious barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.
description:
Hi-Pon 30-03 Epoxy Midcoat 80 is a two-pack, high solids, fast dry epoxy coating. It provides a high build barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.
description:
Hi-Pon 30-04 Epoxy MIO 70 is a two-pack polyamide cured epoxy coating containing Micaceous Iron Oxide pigment. It is specially formulated to give high order of protection for steel structure against corrosion. If it is to be applied over steel surface, it is preferable to be used in combination with the primers as recommended.
description:
Hi-Pon 300 CUI Epoxy Phenolic is a two-pack, self-priming high solids epoxy phenolic coating with excellent corrosion resistance when used to protect steelwork under thermal insulation in areas subjected to wet and dry cycling. It also offers good chemical resistance.
description:
Hi-Pon 40-02 Epoxy Top Coat is a two-pack amine-adduct cured epoxy finish coat specially developed to achieve long-term corrossion protection for many type of surfaces i.e. aluminium, galvanising, concrete and mild steel. This feature combined with its wide range of resistance properties make Hi-Pon 40-02 a durable, high performance and economical coating for non-immersion as well as immersion services.
description:
Hi-Pon 50-01 Polyurethane Top Coat is a two-pack, high-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
description:
Hi-Pon 600HT AC is a one-pack, ambient-cured silicone coating which can withstand dry heat temperature up to 540°C. It is designed for use as a top coat for long-term corrosion protection of steel exposed to high temperature (below 540°C).
description:
Hi-Pon 80-02 Epoxy Novolac is a two-pack epoxy novolac coating for blast cleaned and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.
description:
Hi-Pon 80-03 Epoxy Phenolic Primer is a two-pack epoxy phenolic coating for blast cleaned steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.
description:
Hi-Pon 80-04 Epoxy Phenolic Top Coat is a two-pack epoxy phenolic coating for blast cleaned and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.
description:
Hi-Pon 80-05 Epoxy TL 70 is a two-pack epoxy tank lining for potable water.
description:
Hi-Pon 80-07 Novolac Vinyl Ester Primer is a two-pack, chemical resistant novolac-based vinyl ester coating. It is designed to promote adhesion to properly prepared carbon steel and concrete substrates. Suitable for use as primer in atmospheric and immersed environments.
description:
Hi-Pon 80-08 Novolac Vinyl Ester GF is a two-pack, high build and chemical resistant novolac vinyl ester coating, reinforced with glass flakes. Suitable for properly prepared carbon steel and concrete substrates in atmospheric and immersed environments.
description:
Hi-Pon 80-16 Epoxy SF is a two-pack, solvent-free, high build epoxy tank lining for potable water. Suitable for properly prepared carbon steel and concrete.
description:
Hi-Pon 80-17 Epoxy Phenolic SF is a two-pack, solvent-free, high build epoxy phenolic coating for blasted steel and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.
description:
Hi-Pon 80-18 Epoxy Novolac SF is a two-pack, solvent-free, high build epoxy novolac coating specially developed to provide resistance to 98% sulphuric acid upon exposure. Suitable for properly prepared carbon steel and concrete.
description:
Hi-Pon 90-01 Epoxy Glass Flake HB 95 is a two-pack, low VOC, high solids, high build epoxy coating, reinforced with glass flakes. It provides excellent corrosion protection and has good abrasion resistance. Suitable for seawater immersion.
description:
Zinky-10 Inorganic Zinc Shop Primer is a two-pack, fast-drying, solvent-based coating composed of ethyl silicate and zinc dust. The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Zinky-12 Inorganic Zinc Rich Primer 77 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents. The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 2). The type of zinc dust used complies with ASTM D 520 (Type II). It has been tested for Slip Coefficient and Creep Resistance, using ASTM A490 bolts and meets Class B requirements by RCSC Specification for Structural Joints Using High-Strength Bolts (Appendix A).
description:
Zinky-13 Inorganic Zinc Rich Primer 85 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents. The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 1) and ISO 12944-5. The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Zinky-22 Epoxy Zinc Rich Primer 80 is a two-pack, fast dry, zinc-rich epoxy primer. It provides excellent corrosion resistance with hard, abrasion and weathering resistant film. The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 2) and ISO 12944-5. The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Zinky-23 Epoxy Zinc Rich Primer 85 is a two-pack, fast dry, zinc-rich epoxy primer. It is recommended where high level of corrosion resistance is required. The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 1) and ISO 12944-5. The type of zinc dust used complies with ASTM D 520 (Type II).
search results // 28 items found