By searching our products, you will find product datasheets, material safety datasheets an a whole host of other product information designed to help you find the high performance coating that best suits your needs.
Browse by Product Name
search product by name
description:
A tin-free, CDP (Controlled Depletion Polymer) type antifouling paint containing cuprous oxide as the main biocide, which is designed for general ocean-going ships. This product shows stable depletion rate achieved by the combination of a special hydrophobic resin and a hydrophilic resin.
description:
Duflon 4F II Fresh is a high class fluorine, two-pack air-cured fluorocarbon providing excellent gloss and color retention, excellent resistance to water, weather, contaminated gas and chemicals.
description:
Duflonar high performance polyvinylidene fluoride (PVF2) coating is intended for use on architectural aluminium surfaces when the ultimate protection against weathering is required. 70% of the binder consist of polyvinylidene fluoride, as manufactured under the trade names of Hylar 5000 or Kynar 500 base resins. All Duflonar coatings meet or exceed all the requirements of AAMA 2605-05 "Voluntary Specification, Performance Requirements and Test Procedures for SUPERIOR PERFORMING ORGANIC COATINGS ON ALUMINIUM EXTRUSIONS AND PANELS" Duflonar retains its properties for decades and provides protection and long-term economy with inherent advantages over other forms of coatings.
description:
A hydrolytic self-polishing tin-free antifouling which contains a special copper acrylate copolymer based on our patented technology. It is specially designed for general ocean-going vessels. ECOLOFLEX SPC series ensure excellent and long term antifouling performance endorsed by massive track records.
description:
Patented copolymer technology (Copper silyl acrylate copolymer) which ensures long term and stable self-smoothing effect which makes the fresh active coating surface constantly exposed to seawater, resulting in excellent antifouling performance.
description:
Patented copolymer technology (Copper silyl acrylate copolymer) which ensures long term and stable self-smoothing effect which makes the fresh active coating surface constantly exposed to seawater, resulting in excellent antifouling performance. It is specially designed for coastal vessels.
description:
A unique and ultimate biocide-free antifouling paint based on the same technology of the silicone elastomer. Low frictional resistance to prevent shipfouling organisms from settling is realized by the silicone elastomer that has super water repelling property. ECOLOSILK differs from the other A/F paints in that it contains no biocide taking the environmental issues into consideration. It is designed especially for high speed and high activity ships. Its characteristics, that it is not of a polishing type with less film deterioration and not chemically altered, ensure the stable and long term antifouling performance to prolong the intervals of docking.
description:
Epoxy Mastic Primer is a two-pack epoxy polyamide coating, specifically designed as a self-priming, surface tolerant paint system or as an intermediate coat in heavy duty paint system where low VOC and high film build are required. Lead and chromate-free.
description:
Hi-Acryl 1901 Acrylic Top Coat is a single-pack, fast-drying acrylic copolymer paint. It has good weatherability, hardness and abrasion resistance performance to provide durable performance in harsh and rugged conditions.
description:
Hi-Acryl 1902 Acrylic Top Coat is a one-pack, fast-drying acrylic copolymer finish coat. It has good weatherability and hardness to provide durable performance in harsh and rugged conditions.
description:
Hi-Alkyd 1401 Red Oxide HB Primer is a one-pack, high build, and fast-drying alkyd based primer pigmented with red iron oxide for protection of structural steel in industrial environments.
description:
Hi-Alkyd 1402 Zinc Phosphate HB Primer is a one-pack, high build, and fast-drying alkyd based primer pigmented with zinc phosphate for protection of structural steel in industrial environments.
description:
Hi-Alkyd 1404 Red Oxide Primer is a one-pack, fast-drying alkyd primer pigmented with red iron oxide for protection of structural steel in mild industrial and commercial environments.
description:
Hi-Alkyd 1405 Undercoat is a one-pack alkyd undercoat. It is fast drying and provides a good film build to the overall coating system.
description:
Hi-Alkyd 1406 Zinc Phosphate Primer is a one-pack, fast-drying alkyd primer pigmented with zinc phosphate for protection of structural steel in mild industrial and commercial environments.
description:
Hi-Alkyd 1501 Alkyd Top Coat is a one-pack alkyd gloss enamel finish coat. It is fast drying and provides a durable finish with good gloss retention.
description:
Hi-Dro 60-01 Acrylic Sheen Top Coat is a one-pack, high performance, water-based acrylic finish coat, specially formulated with enhanced anti-algae and anti-streak marks performance.
description:
Hi-Dro 60-02 Acrylic Gloss Top Coat is a one-pack, high performance, water-based acrylic finish coat. It has extremely low odour during application and drying.
description:
Hi-Dro 63-01 Universal Epoxy is a two-pack, high performance, low VOC water-based epoxy coating. It has excellent adhesion and good corrosion resistance. Suitable for use as a direct-to-metal primer or as an intermediate.
description:
Hi-Dro 63-02 Epoxy MIO is a two-pack, water-based epoxy intermediate coating pigmented with micaceous iron oxide. It provides a high build impervious barrier coating that gives excellent adhesion and anti-corrosive properties.
description:
Hi-Dro 65-01 Polyurethane Top Coat is a two-pack, water-based acrylic polyurethane finish coat. It provides excellent colour and gloss retention. With selected solar reflective pigments, it can lower surface temperatures and consequently decrease the surrounding air temperature
description:
Hi-Floro 6738 Fluorocarbon Top Coat is a two-pack, fast dry fluorocarbon finish coat. It provides excellent film stability, good resistance of contamination, weathering and chemicals.
description:
Hi-Floro 6740 Fluorocarbon 4F Top Coat is a two-pack air-cured fluorocarbon finish coat. It provides excellent gloss and colour retention, excellent resistance to water, weather, contaminated gas and chemicals.
description:
Hi-Pon 20-01 Epoxy Primer is a two-pack, high solids epoxy coating that offers good cathodic protection, and excellent resistance to water and seawater.
description:
Hi-Pon 20-03 Epoxy Red Oxide Primer is a two-pack amine-adduct cured epoxy primer designed for use as a high performance primer for many types of surfaces i.e. aluminium, galvanizing, steelwork, concrete, GRP and phenolic sheeting.
description:
Hi-Pon 20-03 Epoxy White Primer is a two-pack amine-adduct cured epoxy primer designed for use as a high performance primer for many types of surfaces i.e. aluminium, galvanizing, steelwork, concrete, GRP and phenolic sheeting.
description:
Hi-Pon 20-04 STE 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric environments.
description:
Hi-Pon 20-04 STE AL 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating pigmented with aluminium flakes. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
description:
Hi-Pon 20-04 STE GF 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating pigmented with glass flakes. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
description:
Hi-Pon 20-04 STE IM 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
description:
Hi-Pon 20-04 STE MIO 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating pigmented with micaceous iron oxide. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.
description:
Hi-Pon 20-07 Epoxy Primer 70 is a two-pack, high build, fast drying polyamide-curd epoxy coating pigmented with zinc phosphate. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of carbon steel and galvanised steel in atmospheric environments.
description:
Hi-Pon 20-09 Epoxy Shop Primer FD is a two-pack, fast drying amide- cured epoxy prefabrication primer.
description:
Hi-Pon 20-09 Epoxy Shop Primer FD Autoblast is a two-pack, fast drying amide-cured epoxy prefabrication primer.
description:
Hi-Pon 20-10 Epoxy Zinc Phosphate 63 is a two-pack, fast drying polyamide-cured epoxy primer pigmented with zinc phosphate.
description:
Hi-Pon 20-12 STE Express is a two-pack, fast-drying, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric environments.
description:
Hi-Pon 20-14 Epoxy U-Coat is a two-pack, high solids epoxy which can be used as primer or finish coat.
description:
Hi-Pon 20-16 Epoxy Express is a two-pack, high solids, fast drying epoxy coating. It is recommended for use on ferrous and non-ferrous structures where fast drying or rapid recoating is desired. Suitable for properly prepared carbon steel, galvanized steel, shop primed steel, aluminium and concrete.
description:
Hi-Pon 200 CUI Epoxy Phenolic is a two-pack self-priming epoxy phenolic coating with excellent corrosion resistance when used to protect steelwork under thermal insulation in areas subjected to wet and dry cycling. It also offers good chemical resistance.
description:
Hi-Pon 30-02 Epoxy MIO 80 is a two-pack, high solids, fast dry epoxy coating pigmented with micaceous iron oxide. It provides a high build impervious barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.
description:
Hi-Pon 30-03 Epoxy Midcoat 80 is a two-pack, high solids, fast dry epoxy coating. It provides a high build barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.
description:
Hi-Pon 30-04 Epoxy MIO 70 is a two-pack polyamide cured epoxy coating containing Micaceous Iron Oxide pigment. It is specially formulated to give high order of protection for steel structure against corrosion. If it is to be applied over steel surface, it is preferable to be used in combination with the primers as recommended.
description:
Hi-Pon 300 CUI Epoxy Phenolic is a two-pack, self-priming high solids epoxy phenolic coating with excellent corrosion resistance when used to protect steelwork under thermal insulation in areas subjected to wet and dry cycling. It also offers good chemical resistance.
description:
Hi-Pon 300HT Primer is a one-pack, silicone acrylic based coating which can withstand dry heat temperature up to 300°C.
description:
Hi-Pon 300HT Top Coat is a one-pack, silicone acrylic based coating which can withstand dry heat temperature up to 300°C.
description:
Hi-Pon 40-02 Epoxy Top Coat is a two-pack amine-adduct cured epoxy finish coat specially developed to achieve long-term corrossion protection for many type of surfaces i.e. aluminium, galvanising, concrete and mild steel. This feature combined with its wide range of resistance properties make Hi-Pon 40-02 a durable, high performance and economical coating for non-immersion as well as immersion services.
description:
Hi-Pon 40-04 Epoxy Top Coat is a two-pack amine-adduct cured epoxy finish coat for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. If it is to be applied over steel, it has to be used in combination with the appropriate primers as recommended below. If it is to be applied over concrete, the surface should be acid-treated prior to application. Hi-Pon 40-04 Epoxy Top Coat is also available in non-skid quality.
description:
Hi-Pon 400HT is a two-pack, ambient cured inorganic copolymer based coating with high-heat resistance pigments which can withstand dry heat temperature up to 400°C.
description:
Hi-Pon 50-01 Polyurethane Top Coat is a two-pack, high-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
description:
Hi-Pon 50-01 AS Polyurethane Top Coat is a two-pack, aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
description:
Hi-Pon 50-03 Polyurethane Top Coat is two-pack, semi-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
description:
Hi-Pon 50-07 Acrylic Polysiloxane is a two-pack, low VOC and high solids isocyanate-free acrylic polysiloxane finish coat. It provides high durability, excellent gloss and colour retention. It also exhibit good flexibility, abrasion resistance and resistant to splashes and spillage of chemicals such as acids, and alkali.
description:
Hi-Pon 50-09 Polyester PU Top Coat is a two-pack, polyester polyurethane finish coat. It offers excellent flexibility, abrasion, and durability properties.
description:
Hi-Pon 50-10 Polyester PU Primer is a two-pack, polyester polyurethane primer. It offers excellent flexibility, abrasion, and durability properties.
description:
Hi-Pon 50-21 Polyurethane Top Coat is two-pack, semi-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
description:
Hi-Pon 50-31 Polyurethane Top Coat is two-pack, low-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.
description:
Hi-Pon 600HT AC is a one-pack, ambient-cured silicone coating which can withstand dry heat temperature up to 540°C.
It is designed for use as a top coat for long-term corrosion protection of steel exposed to high temperature (below 540°C).
description:
Hi-Pon 80-02 Epoxy Novolac is a two-pack epoxy novolac coating for blast cleaned and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.
description:
Hi-Pon 80-03 Epoxy Phenolic Primer is a two-pack epoxy phenolic coating for blast cleaned steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.
description:
Hi-Pon 80-04 Epoxy Phenolic Top Coat is a two-pack epoxy phenolic coating for blast cleaned and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.
description:
Hi-Pon 80-05 Epoxy TL 70 is a two-pack epoxy tank lining for potable water.
description:
Hi-Pon 80-07 Novolac Vinyl Ester Primer is a two-pack, chemical resistant novolac-based vinyl ester coating. It is designed to promote adhesion to properly prepared carbon steel and concrete substrates. Suitable for use as primer in atmospheric and immersed environments.
description:
Hi-Pon 80-08 Novolac Vinyl Ester GF is a two-pack, high build and chemical resistant novolac vinyl ester coating, reinforced with glass flakes. Suitable for properly prepared carbon steel and concrete substrates in atmospheric and immersed environments.
description:
Hi-Pon 80-13 Vinyl Ester Primer is a two-pack, chemical resistant vinyl ester coating. It is designed to promote adhesion to properly prepared carbon steel and concrete substrates. Suitable for use as primer in atmospheric and immersed environments.
description:
Hi-Pon 80-14 Vinyl Ester Lining is a two-pack, trowel applied high chemical resistant vinyl ester coating, with inert fillers and fibreglass reinforcement. Suitable for properly prepared carbon steel and concrete substrates in atmospheric and immersed environments.
description:
Hi-Pon 80-15 Novolac Vinyl Ester Lining is a two-pack, trowel applied high chemical resistant novolac-based vinyl ester coating, with inert fillers and fibreglass reinforcement. Suitable for properly prepared carbon steel and concrete substrates in atmospheric and immersed environments.
description:
Hi-Pon 80-16 Epoxy SF is a two-pack, solvent-free, high build epoxy tank lining for potable water. Suitable for properly prepared carbon steel and concrete.
description:
Hi-Pon 80-17 Epoxy Phenolic SF is a two-pack, solvent-free, high build epoxy phenolic coating for blasted steel and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.
description:
Hi-Pon 80-18 Epoxy Novolac SF is a two-pack, solvent-free, high build epoxy novolac coating specially developed to provide resistance to 98% sulphuric acid upon exposure. Suitable for properly prepared carbon steel and concrete.
description:
Hi-Pon 80-23 Inorganic Zinc Tank Coating is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use as a single coat on steel for atmospheric and immersed environments. The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Hi-Pon 90-01 Epoxy Glass Flake HB 95 is a two-pack, low VOC, high solids, high build epoxy coating, reinforced with glass flakes. It provides excellent corrosion protection and has good abrasion resistance. Suitable for seawater immersion.
description:
Hi-Pon 90-05 Epoxy HB 85 is a two-pack, surface-tolerant, high solids modified epoxy coating. It has excellent cathodic disbondment resistance and will continue to cure when immersed in water.
description:
Hi-Pon 90-07 Epoxy Glass Flake HB is a two-pack, high build, high solids epoxy coating, reinforced with high level of chemically resistant glass flakes. It has excellent corrosion, impact and abrasion resistance.
description:
Hi-Pon 90-08 Epoxy Ultra HB is a two-pack, ultra high build, high solids epoxy coating. It can be applied up to 3000 microns (120 mils) dry film thickness. It has excellent corrosion, impact and abrasion resistance.
description:
Hi-Pon 90-11 STE SF is a two-pack, surface-tolerant, solvent-free modified epoxy coating. Suitable for properly prepared carbon steel, shop primed steel and concrete in atmospheric and immersed environments. It has good tolerance to application over damp surfaces and it can be applied without dew point restriction. It can be applied to wet blast or ultra-high pressure water cleaned substrates.
description:
Hi-Pon 90-12 Universal Pure Epoxy is a two-pack, high solid pure epoxy coating. It has excellent anti-corrosion performance and adhesion to carbon steel. It is also compatible with well-designed cathodic protection systems. Suitable for properly prepared carbon steel, galvanised steel, shop primed steel and concrete in atmospheric and immersed environments.
description:
Hi-Vinyl 1101 Wash Primer is a one-pack, phenolic-modified polyvinyl butyral wash primer containing phosphoric acid. It is fast drying and has excellent adhesion when applied to properly prepared ferrous and non-ferrous substrates.
description:
Hi-Vinyl 1102 CF Etching Primer is a one-pack, lead and chromate-free phenolic-modified polyvinyl butyral wash primer containing phosphoric acid. It is fast drying and has excellent adhesion when applied to properly prepared ferrous and non-ferrous substrates.
description:
Hi-Vinyl 1201 Zinc Phosphate Primer is a one-pack, lead and chromate free vinyl copolymer primer pigmented with zinc phosphate. It is fast drying and has excellent adhesion and corrosion protection when applied to properly prepared ferrous and non-ferrous substrates.
description:
Nippelux 1801 Enamel is an interior and exterior finish coat on metal and wooden surfaces.
description:
6052 Nippenyl Wash Primer Extra is recommended as a shop-primer for long exposure steel plates
description:
NIPPON Concrete Metal Bonding Agent is a dual component system, consisting of Emulsion, a uniquely blended binding agent, and Powder, a super-fine specialized cement powder. It has the ability to bond with metal surfaces and provide a surface coating that encases and protects old deteriorating, ferrous products.
NIPPON Concrete Metal Bonding Agent is a universal coating which can be used as a primer base coat as well as a top coat depending on project requirements. When properly applied, it provides both the applicator and asset owner with a cost-effective infrastructure maintenance program. NIPPON Concrete Metal Bonding Agent is environmentally friendly due to its use of recycled industrial material, extremely low VOC level, and ease of application and use.
(Corrosion Resistant Repair method)
description:
NIPPON Concrete Permeating Solution is a water-borne, green product that works by permeating concrete. It is not a silicate, sodium silicate or lithium-based product, but a hydrogel. NIPPON Concrete Permeating Solution is a 1K material and is amorphous in the absence of water and possesses the ability to repeatedly re-hydrate while performing three main functions:
- Permeates concrete substrates from 5.5 to 6 inches (up to ~150mm) below the surface.
- Removes chlorides and salts from concrete substrate surfaces as well as below.
- Creates an aqueous film that protects against water while allowing the concrete to continue to breath.
description:
Nippon Corrosion Resistant Solution has the ability to create an ionic bond with metal and provide a surface coating that encapsulates corrosion and protects old, deteriorating, ferrous substrates. It may be applied directly to surfaces with tightly adhered intact rust (with proper preparation) and will penetrate tightly adhered intact rust to bond with the metal substrate below to stop the corrosion process.
When properly applied, it provides both the applicator and asset owner with a cost effective infrastructure maintenance program. Nippon Corrosion Resistant Solution is environmentally friendly due to it being water-based, extremely low VOC level, and ease of application and use.
(Corrosion Resistant Repair method)
description:
NIPPON E-MARINE A/C is a two-pack, high volume solid epoxy universal primer aiming for less volatile organic compounds. As this epoxy coating offers excellent anti-abrasion property, resistance to water and seawater, and cathodic protection, it is suitable for all areas such as the underwater hulls, boottop, topsides, decks, holds, ballast tanks, etc. It can be overcoated with various kinds of finishes.
description:
A two-pack epoxy tie-coat anticorrosive designed taking health, safety and environmental issues into consideration. Combined with NIPPON E-MARINE A/C, the system provides excellent seawater resistance and good adhesion to various kinds of antifoulings and finishes.
description:
Nippelux 1003 Red Oxide Primer is an anti-corrosive primer for the protection of metals under mild corrosion condition.
description:
Nippelux 1701 Undercoat is an undercoat for Nippelux 1801 Enamel and similar types of finish coats. Can be used on previously painted surfaces and appropriately primed new surfaces.
description:
A superior grade pure epoxy with excellent abrasion resistant properties designed in full consideration of health and safety, and environmental issues. The coating is formulated with special phenol based resins to reinforce resistance to cracking especially on welds, improve its anticorrosive and adhesion properties, and provide excellent resistance to saltwater and cathodic disbanding. Suitable for multipurpose use, its enhanced resistance to freshwater and seawater make it ideal for marine ballast tanks, crude oil tanks, void spaces, etc., land based storage tanks, and industrial storage facilities. The coating is fully compliant with IMO Performance Standard for Protective Coatings. (1) Buff in colour --- SI paint The coating is distinguished by its unique and patented Self-indicating (SI) technology that enables the applicator to visually confirm that the correct film thickness has been applied by checking the colour development from Lucent to Buff during the application process. The full colour is realized only when the correct dry film thickness has been applied, therefore any areas of low film thickness can easily be detected by visual inspection. (2) Gray, Dark Gray, Red Oxide in colour --- Non SI paint
description:
A two-pack pure epoxy designed for petroleum and chemical product tanks. It offers superior resistance to petroleum products, solvents, water and chemical attack. 1st Buff colour is characterized by Self Indicating (SI) technology, which enables a painter to visually judge if the correct film thickness(wet / dry) has been achieved during the application process and after the completion of painting. Two coat system with SI paint (1st coat) plus non-SI paint (2nd coat) is recommended.
description:
Two pack abrasion resistant aluminium pure epoxy anticorrosive. It provides long term protection in areas where severe corrosion may occur on new buildings such as the underwater hulls, boottop, topsides, decks, holds, ballast tanks, etc. This winter workable epoxy coating is highly resistant to mechanical damages.
description:
Zinky-10 Inorganic Zinc Shop Primer is a two-pack, fast-drying, solvent-based coating composed of ethyl silicate and zinc dust. The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Zinky-12 Inorganic Zinc Rich Primer 77 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.
The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 2). The type of zinc dust used complies with ASTM D 520 (Type II). It has been tested for Slip Coefficient and Creep Resistance, using ASTM A490 bolts and meets Class B requirements by RCSC Specification for Structural Joints Using High-Strength Bolts (Appendix A).
description:
Zinky-13 Inorganic Zinc Rich Primer 85 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.
The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 1) and ISO 12944-5. The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Zinky-14 Inorganic Zinc Rich Primer 80 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.
The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 2) and ISO 12944-5. The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Zinky-15 Inorganic Zinc Primer 65 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.
description:
Zinky-21 Epoxy Zinc Rich Primer 77 is a two-pack, fast dry, zinc-rich epoxy primer. It provides excellent corrosion resistance with hard, abrasion and weathering resistant film. The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 2). The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Zinky-22 Epoxy Zinc Rich Primer 80 is a two-pack, fast dry, zinc-rich epoxy primer. It provides excellent corrosion resistance with hard, abrasion and weathering resistant film. The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 2) and ISO 12944-5. The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Zinky-23 Epoxy Zinc Rich Primer 85 is a two-pack, fast dry, zinc-rich epoxy primer. It is recommended where high level of corrosion resistance is required. The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 1) and ISO 12944-5. The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Zinky-25 Epoxy Zinc Primer 45 is a two-pack epoxy zinc primer. It provides excellent corrosion resistance with hard, abrasion and weathering resistant film. The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Zinky-26 Epoxy Zinc Primer 65 is a two-pack epoxy zinc primer. It provides excellent corrosion resistance with hard, abrasion and weathering resistant film. The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 3). The type of zinc dust used complies with ASTM D 520 (Type II).
description:
Zinky-41 WB Epoxy Zinc Rich Primer is a three-pack, low VOC, fast drying water-based zinc-rich epoxy primer. It provides excellent corrosion resistance and weathering resistance.
The level of zinc dust by weight present in the dried film conforms to SSPC-Paint 20 (Level 1) and ISO 12944-5. The type of zinc dust used complies with ASTM D 520 (Type II).
Copyright © 2025 Nippon Paint Singapore. All Rights Reserved