browse by product categories
Description:
NIPPON C2M is a dual component system, consisting of C2M Emulsion (18.95 litres or 5 gallons), a uniquely blended binding agent, and C2M Powder (18.95 litres or 5 gallons), a super-fine specialized cement powder. C2M has the ability to bond with metal surfaces and provide a surface coating that encases and protects old deteriorating, ferrous products. C2M contains various anti-corrosion agents and superior bonding strength. High adhesion = high corrosion resistance. NIPPON C2M is a universal coating which can be used as a primer base coat as well as a top coat depending on project requirements. When properly applied, NIPPON C2M provides both the applicator and asset owner with a cost effective infrastructure maintenance program. NIPPON C2M is environmentally friendly due to its use of recycled industrial material, extremely low VOC level, and ease of application and use. NIPPONC2M has an advantage over other coating systems by providing asset protection against many freeze/thaw, chemical and abrasion threats.Description:
NIPPON CP is a water-borne, green product that works by permeating concrete. NIPPON CP is not a silicate, sodium silicate or lithium-based product, but a hydrogel. NIPPON CP is a 1 K material, just stir or shake before using. NIPPON CP is amorphous in the absence of water and possesses the ability to repeatedly re-hydrate while performing three main functions:- Permeates concrete substrates from 5.5 to 6 inches (up to ~150mm) below the surface.
- Removes chlorides and salts from concrete substrate surfaces as well as below.
- Creates an aqueous film that protects against water while allowing the concrete to continue to breath.
Description:
NIPPON HW is a dual purpose product. It provides long lasting protection against water infiltration, and deep introduction of a catalytic chemistry that reacts directly to alkali. It creates alkali hydrates that will become a complex silica hydrogel that bonds within the voids found in concrete. NIPPON HW will pass around various aggregates and fill empty spaces in the concrete matrix. The alkali will be turned into a natural compound, this will lessen other further reactions.Description:
NIPPON CRS primer has the ability to create a strong adhesive bond with metal and provide a surface coating that encapsulates corrosion and protects old, deteriorating, ferrous substrates. NIPPON CRS may be applied directly to surfaces with tightly adhered intact rust (with proper preparation). NIPPON CRS will penetrate tightly adhered intact rust to bond with the metal substrate below to stop the corrosion process. When properly applied, NIPPON CRS provides both the applicator and asset owner with a cost effective infrastructure maintenance program. NIPPON CRS is environmentally friendly due to it being water-based, extremely low VOC level, and ease of application and use.Description:
Hi-Pon 80-02 Epoxy Novolac is a two-pack epoxy novolac coating for blast cleaned and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.Description:
Hi-Pon 80-18 Epoxy Novolac SF is a two-pack, solvent-free, high build epoxy novolac coating specially developed to provide resistance to 98% sulphuric acid upon exposure. Suitable for properly prepared carbon steel and concrete.Description:
Hi-Pon 80-03 Epoxy Phenolic Primer is a two-pack epoxy phenolic coating for blast cleaned steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.Description:
Hi-Pon 80-04 Epoxy Phenolic Top Coat is a two-pack epoxy phenolic coating for blast cleaned and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.Description:
Hi-Pon 80-17 Epoxy Phenolic SF is a two-pack, solvent-free, high build epoxy phenolic coating for blasted steel and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as non-immersion services.Description:
Hi-Pon 80-05 Epoxy TL 70 is a two-pack epoxy tank lining for potable water.Description:
Hi-Pon 80-16 Epoxy SF is a two-pack, solvent-free, high build epoxy tank lining for potable water. Suitable for properly prepared carbon steel and concrete.Description:
A superior grade pure epoxy with excellent abrasion resistant properties designed in full consideration of health and safety, and environmental issues. The coating is formulated with special phenol based resins to reinforce resistance to cracking especially on welds, improve its anticorrosive and adhesion properties, and provide excellent resistance to saltwater and cathodic disbanding. Suitable for multipurpose use, its enhanced resistance to freshwater and seawater make it ideal for marine ballast tanks, crude oil tanks, void spaces, etc., land based storage tanks, and industrial storage facilities. The coating is fully compliant with IMO Performance Standard for Protective Coatings. (1) Buff in colour --- SI paint The coating is distinguished by its unique and patented Self-indicating (SI) technology that enables the applicator to visually confirm that the correct film thickness has been applied by checking the colour development from Lucent to Buff during the application process. The full colour is realized only when the correct dry film thickness has been applied, therefore any areas of low film thickness can easily be detected by visual inspection. (2) Gray, Dark Gray, Red Oxide in colour --- Non SI paintDescription:
A two-pack pure epoxy designed for petroleum and chemical product tanks. It offers superior resistance to petroleum products, solvents, water and chemical attack. 1st Buff colour is characterized by Self Indicating (SI) technology, which enables a painter to visually judge if the correct film thickness(wet / dry) has been achieved during the application process and after the completion of painting. Two coat system with SI paint (1st coat) plus non-SI paint (2nd coat) is recommended.Description:
Hi-Pon 80-07 Novolac Vinyl Ester Primer is a two-pack, chemical resistant novolac-based vinyl ester coating. It is designed to promote adhesion to properly prepared carbon steel and concrete substrates. Suitable for use as primer in atmospheric and immersed environments.Description:
Hi-Pon 80-08 Novolac Vinyl Ester GF is a two-pack, high build and chemical resistant novolac vinyl ester coating, reinforced with glass flakes. Suitable for properly prepared carbon steel and concrete substrates in atmospheric and immersed environments.Description:
Hi-Pon 80-13 Vinyl Ester Primer is a two-pack, chemical resistant vinyl ester coating. It is designed to promote adhesion to properly prepared carbon steel and concrete substrates. Suitable for use as primer in atmospheric and immersed environments.Description:
Hi-Pon 80-14 Vinyl Ester Lining is a two-pack, trowel applied high chemical resistant vinyl ester coating, with inert fillers and fibreglass reinforcement. Suitable for properly prepared carbon steel and concrete substrates in atmospheric and immersed environments.Description:
Hi-Pon 80-15 Novolac Vinyl Ester Lining is a two-pack, trowel applied high chemical resistant novolac-based vinyl ester coating, with inert fillers and fibreglass reinforcement. Suitable for properly prepared carbon steel and concrete substrates in atmospheric and immersed environments.Description:
Hi-Pon 90-01 Epoxy Glass Flake HB 95 is a two-pack, low VOC, high solids, high build epoxy coating, reinforced with glass flakes. It provides excellent corrosion protection and has good abrasion resistance. Suitable for seawater immersion.Description:
Hi-Pon 90-07 Epoxy Glass Flake HB is a two-pack, high build, high solids epoxy coating, reinforced with high level of chemically resistant glass flakes. It has excellent corrosion, impact and abrasion resistance.Description:
Hi-Pon 90-05 Epoxy HB 85 is a two-pack, surface-tolerant, high solids modified epoxy coating. It has excellent cathodic disbondment resistance and will continue to cure when immersed in water.Description:
Hi-Pon 90-08 Epoxy Ultra HB is a two-pack, ultra high build, high solids epoxy coating. It can be applied up to 3000 microns (120 mils) dry film thickness. It has excellent corrosion, impact and abrasion resistance.Description:
Hi-Pon 50-07 Polysiloxane Topcoat is a two-pack, low VOC and high solids isocyanate-free acrylic polysiloxane finish coat. It provides high durability, excellent gloss and colour retention. It also exhibit good flexibility, abrasion resistance and resistant to splashes and spillage of chemicals such as acids, and alkali.Description:
Hi-Acryl 1901 Acrylic Top Coat is a single-pack, fast-drying acrylic copolymer paint. It has good weatherability, hardness and abrasion resistance performance to provide durable performance in harsh and rugged conditions.Description:
Hi-Acryl 1902 Acrylic Top Coat is a one-pack, fast-drying acrylic copolymer finish coat. It has good weatherability and hardness to provide durable performance in harsh and rugged conditions.Description:
Hi-Dro 60-01 Acrylic Sheen Top Coat is a one-pack, high performance, water-based acrylic finish coat, specially formulated with enhanced anti-algae and anti-streak marks performance.Description:
Hi-Dro 60-02 Acrylic Gloss Top Coat is a one-pack, high performance, water-based acrylic finish coat. It has extremely low odour during application and drying.Description:
Hi-Alkyd 1501 Alkyd Top Coat is a one-pack alkyd gloss enamel finish coat. It is fast drying and provides a durable finish with good gloss retention.Description:
Nippelux 1801 Enamel is an interior and exterior finish coat on metal and wooden surfaces.Description:
Hi-Pon 40-02 Epoxy Top Coat is a two-pack amine-adduct cured epoxy finish coat specially developed to achieve long-term corrossion protection for many type of surfaces i.e. aluminium, galvanising, concrete and mild steel. This feature combined with its wide range of resistance properties make Hi-Pon 40-02 a durable, high performance and economical coating for non-immersion as well as immersion services.Description:
Hi-Pon 40-04 Epoxy Top Coat is a two-pack amine-adduct cured epoxy finish coat for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. If it is to be applied over steel, it has to be used in combination with the appropriate primers as recommended below. If it is to be applied over concrete, the surface should be acid-treated prior to application. Hi-Pon 40-04 Epoxy Top Coat is also available in non-skid quality.Description:
Duflon 4F II Fresh is a high class fluorine, two-pack air-cured fluorocarbon providing excellent gloss and color retention, excellent resistance to water, weather, contaminated gas and chemicals.Description:
Duflonar high performance polyvinylidene fluoride (PVF2) coating is intended for use on architectural aluminium surfaces when the ultimate protection against weathering is required. 70% of the binder consist of polyvinylidene fluoride, as manufactured under the trade names of Hylar 5000 or Kynar 500 base resins. All Duflonar coatings meet or exceed all the requirements of AAMA 2605-05 "Voluntary Specification, Performance Requirements and Test Procedures for SUPERIOR PERFORMING ORGANIC COATINGS ON ALUMINIUM EXTRUSIONS AND PANELS" Duflonar retains its properties for decades and provides protection and long-term economy with inherent advantages over other forms of coatings.Description:
Hi-Floro 6738 Fluorocarbon Top Coat is a two-pack, fast dry fluorocarbon finish coat. It provides excellent film stability, good resistance of contamination, weathering and chemicals.Description:
Hi-Pon 50-01 Polyurethane Top Coat is a two-pack, high-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.Description:
Hi-Pon 50-01 AS Polyurethane Top Coat is a two-pack, aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.Description:
Hi-Pon 50-03 Polyurethane Top Coat is two-pack, semi-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.Description:
Hi-Pon 50-09 Polyester PU Top Coat is a two-pack, polyester polyurethane finish coat. It offers excellent flexibility, abrasion, and durability properties.Description:
Hi-Pon 50-10 Polyester PU Primer is a two-pack, polyester polyurethane primer. It offers excellent flexibility, abrasion, and durability properties.Description:
Hi-Alkyd 1405 Undercoat is a one-pack alkyd undercoat. It is fast drying and provides a good film build to the overall coating system.Description:
Nippelux 1701 Undercoat is an undercoat for Nippelux 1801 Enamel and similar types of finish coats. Can be used on previously painted surfaces and appropriately primed new surfaces.Description:
Hi-Pon 30-02 Epoxy MIO 80 is a two-pack, high solids, fast dry epoxy coating pigmented with micaceous iron oxide. It provides a high build impervious barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.Description:
Hi-Pon 30-03 Epoxy Midcoat 80 is a two-pack, high solids, fast dry epoxy coating. It provides a high build barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.Description:
Hi-Pon 30-04 Epoxy MIO 70 is a two-pack polyamide cured epoxy coating containing Micaceous Iron Oxide pigment. It is specially formulated to give high order of protection for steel structure against corrosion. If it is to be applied over steel surface, it is preferable to be used in combination with the primers as recommended.Description:
A two-pack epoxy tie-coat anticorrosive designed taking health, safety and environmental issues into consideration. Combined with NIPPON E-MARINE A/C, the system provides excellent seawater resistance and good adhesion to various kinds of antifoulings and finishes.Description:
Hi-Alkyd 1401 Red Oxide HB Primer is a one-pack, high build, and fast-drying alkyd based primer pigmented with red iron oxide for protection of structural steel in industrial environments.Description:
Hi-Alkyd 1402 Zinc Phosphate HB Primer is a one-pack, high build, and fast-drying alkyd based primer pigmented with zinc phosphate for protection of structural steel in industrial environments.Description:
Hi-Alkyd 1404 Red Oxide Primer is a one-pack, fast-drying alkyd primer pigmented with red iron oxide for protection of structural steel in mild industrial and commercial environments.
Description:
Hi-Alkyd 1406 Zinc Phosphate Primer is a one-pack, fast-drying alkyd primer pigmented with zinc phosphate for protection of structural steel in mild industrial and commercial environments.